Yamaha A3000 Owner's Manual - Page 204

EG Function Knob 4 Knob 5 →Level = -63,...,+63 This value sets the velocity sensitivity for the PEG levels: the amount by these levels (initial, attack, sustain, and release rates) vary in response to the velocity of the played note. Set the value to 0 to keep the levels the same for all velocities. Positive settings cause the levels to increase as velocity increases, while negative settings cause the levels to decrease as velocity increases. Range = -63,...,+63 This value sets the range for PEG pitch variation, in semitones. This setting works in conjunction with the level settings at the PEGLevel page (200) to determine how far the PEG levels are from the sample's basic pitch (198). If you set the PEGLevel settings to maximum (+127 or -127), then the distance between each level and the basic pitch will be equal to the number of semitones that you set here. 202 Chapter 5 EDIT Mode