Yamaha A3000 Owner's Manual - Page 206
Knob 2, Knob 3, Knob 4, Knob 5
UPC - 027108936673
View all Yamaha A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
LFO Function Knob 2 Knob 3 Knob 4 Knob 5 Wave = Saw, Triangl, Square, S/H This parameter selects the LFO waveform. The waveform, in turn, determines the type of modulation (oscillation) applied to the sample's filter, pitch, and amplitude. Saw (Sawtooth wave) Modulation Triangl (Triangle wave) Modulation Time Time Square Modulation Time S/H ("Sample & hold": random pattern) Modulation Time Speed = 0,...,127 • This value sets the modulation speed for the saw, triangle, or square waveform. Higher values produce faster modulation. • Modulation speed for the S/H waveform must be set at the program side (128). If you have selected the S/H waveform, the screen displays the current program-side setting. You cannot change the setting from this page. Delay = 0,...,127 This parameter sets the interval between Note On and the onset of LFO modulation. Higher values produce longer delay together with a more gradual buildup of the modulation level. Sync = off, on This setting selects whether LFO oscillation always begins from the same phase (at the same point in the LFO waveform). If you set the value to on, LFO oscillation will restart from phase 0 (the leftmost point in the above illustrations) with each new note that you play. 204 Chapter 5 EDIT Mode