Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 100

3 Copy Auto Detect Detects the document size automatically. The following table shows the document sizes that can be detected automatically. Document Feeder Document Glass Auto-detectable Document Size B5, B5 , B4, A5, A5 , A4, A4 , A3, 8.5 x 11", 8.5 x 11" , 11 x 17", 16K , 8K B6, B5, B5 , B4, A6, A5, A5 , A4, A4 , A3 Note • If the document size cannot be detected automatically, a screen to enter the document size appears. The document sizes that can be automatically detected depend on [Paper Size Settings] in the System Administration mode. For more information, refer to "Paper Size Settings" (P.335). Standard Size Select a document size from preset options. You can change the sizes displayed on the screen. For information on the settings, refer to "Original Size Defaults" (P.356). Variable Size Enter the desired scan size when scanning a non-standard size document or when making copies at a size different from the original document size. You can specify a value in the range from 15 to 432 mm for the width (X), and a value in the range from 15 to 297 mm for the length (Y), in 1 mm increments. To help you specify values, use the scales attached on the upper and left edges of the document glass. Note • When the document is loaded in the document feeder, the base point in the Y (length) direction is the center of the edge. If you specify 100 mm, the scan length will be from 50 mm above to 50 mm below the center of the document. Mixed Size Originals (Scanning Different Size Documents Simultaneously) You can scan documents of various sizes simultaneously and make copies on each size or a single size of paper. To use this feature, load the documents in the document feeder. Note • Load documents in landscape orientation. However, always load A5 documents in portrait orientation. • When loading B5 documents together with A3 documents loaded in landscape orientation or A4 documents loaded in portrait orientation, load B5 documents in portrait orientation. • If the top left corners of the documents are not aligned properly, the documents may not be scanned correctly. • The recommended document size combinations are A4 portrait and A3 landscape, or B5 portrait and B4 landscape. If another combination of document sizes is used, the documents can be fed at an angle and may not be copied properly. 1 Select [Mixed Size Originals]. 100