Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 648
The machine failed to send scanned document data to the HTTP server because Web
View all Dell C7765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 648 highlights
23 Problem Solving Status Code 026-722 026-723 026-726 026-727 026-730 026-736 026-737 026-738 027-400 027-442 027-443 Cause and Remedy [Cause] The USB memory device is not initialized. [Remedy] Initialize the USB memory device on a computer with the following file format, and then execute the operation again. • Supported file formats: FAT12, FAT16 (FAT), FAT32 Note • NTFS is not supported. • A software-encrypted USB memory device is not supported. If the error still is not resolved, contact Customer Support at dell.com/contactdell. [Cause] The machine failed to access to the medium. [Remedy] 1)Check that the medium is not inserted or removed, or the other medium is not inserted, while the machine is referencing the medium. 2)Check that the file in the medium can be accessed via a computer. [Cause] The machine configuration information at a print job specification does not match the actual machine configuration. [Remedy] Modify the machine configuration information in the print driver screen to match the actual machine configuration. [Cause] Probable causes are as follows: 1)Unusable characters are included in the path name of the file location. 2)The length of the path name of the file location (including extension) exceeds the number of characters available. [Remedy] Take one of the following measures: 1)Change the path name of the file location. 2)Set the path in the range of 1 to 255 bytes. [Cause] The size of paper loaded in the specified tray is unknown. [Remedy] Check whether the paper guides are correctly positioned in the tray, and then try again. [Cause] An internal error occurred while sending the scanned document to the HTTP server. [Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support at dell.com/contactdell. [Cause] Unable to send the scanned document to the HTTP server because a network error occurred. [Remedy] Consult your network administrator whether the network or the server have any problem. [Cause] The machine failed to send scanned document data to the HTTP server because Web application is closed during it. [Remedy] Execute the operation again. [Cause] Communications with the machine failed. [Remedy] If other messages are displayed, confirm their content. If the control panel is being operated, terminate the operation. If remote access is being executed, wait until it completes. If the error still is not resolved, switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. If the problem persists, contact Customer Support at dell.com/contactdell. [Cause] The IP address of IPv6 already exists. [Remedy] Change the [Auto Stateless Address 1] for IPv6 on the machine, or the IP address of IPv6 on the network device, to remove the duplication of addresses. [Cause] The IP address of IPv6 already exists. [Remedy] Change the [Auto Stateless Address 2] for IPv6 on the machine, or the IP address of IPv6 on the network device, to remove the duplication of addresses. 648