Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 661
Paper that can print faxed documents is not loaded in a tray., Take one of the following measures
View all Dell C7765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 661 highlights
Status Code Status Code 033-551 033-552 033-553 033-554 033-555 033-556 033-557 033-558 033-563 033-564 033-565 033-566 033-567 033-568 Cause and Remedy [Cause] You attempted to change a job immediately before fax or telephone communication completed. [Remedy] Wait for a while, and execute the operation again. [Cause] The total quantity of error lines detected with G3 exceeded the set value. [Remedy] Confirm the model of the other machine, and execute the operation again. If receiving, ask the sender to send again. [Cause] This machine does not have confidential or relay function. The F-code sent from the other machine contains an instruction for a function not supported by the machine. [Remedy] If necessary, check whether the sender entered an invalid F-code. [Cause] The password was omitted or did not match in fax communication. [Remedy] No measure is required. [Cause] The password received from the other machine did not match the password for receiving faxes on the machine. [Remedy] Check whether the sender specified an incorrect machine password. [Cause] The password sent to the other machine did not match the password for receiving faxes on the other machine. [Remedy] If necessary, check whether the correct machine password has been instructed to the other machine. [Cause] The number of services or of recipients exceeds the maximum limit. [Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce the number of recipients, and then send again. [Cause] The machine is set to reject faxes without a remote ID, and a remote ID was not sent from the other machine. [Remedy] Ask the sender to set a remote ID. If necessary, set the machine to receive even when a remote ID is not sent. [Cause] Paper that can print faxed documents is not loaded in a tray. [Remedy] Take one of the following measures: • Specify the paper size. • Confirm whether the paper tray is set correctly. [Cause] The machine was turned off during communication. [Remedy] Wait for a while, confirm the fax service settings and the fax number, and then send again if sending. If the error still is not resolved, contact Customer Support at dell.com/contactdell. [Cause] Cannot send because too many recipients are specified. [Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce the number of recipients, and then send again. [Cause] Cannot send because the recipient (fax number) is not specified. [Remedy] Correctly specify the recipient's fax number. [Cause] The recipient (fax number) is incorrect. [Remedy] Correctly enter the recipient's fax number, and execute the operation again. [Cause] An error occurred during fax transmission. [Remedy] Execute the operation again. If receiving, ask the sender to send again. If the error still is not resolved, contact Customer Support at dell.com/contactdell. 661