Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 610

23 Problem Solving Status Code 003-311 003-318 003-319 003-320 003-321 003-322 003-323 003-324 003-325 003-326 003-327 003-328 003-329 003-330 003-331 003-332 003-333 003-334 003-335 003-336 003-337 003-338 003-339 003-340 003-341 003-342 003-343 003-344 003-345 003-346 003-700 003-702 003-703 003-704 003-705 003-750 Cause and Remedy [Cause] An error occurred. [Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. If the same message is displayed again, contact Customer Support at dell.com/contactdell. [Cause] Too many documents are set in the document feeder after clearing the paper jam. [Remedy] Check the output, and then replace the documents that have not been copied yet. [Cause] You tried to copy sides 1 and 2 of a document simultaneously specifying different Reduce/Enlarge ratio for each side. [Remedy] Specify the same Reduce/Enlarge ratio for both sides. [Cause] The Calibration Chart is not detected correctly. [Remedy] Place the Calibration Chart properly. [Cause] An error is found in the calibration pattern read, and the machine may be out of order. [Remedy] Execute the calibration again. If the error is not still resolved, contact Customer Support at dell.com/contactdell. [Cause] Copying is started before the machine exits the Power Saver mode and detects the change for the tray size, when the paper size set in the tray that has been changed during the Power Saver mode. [Remedy] Cancel copying, and perform the operation for copying again. [Cause] Unable to store any documents using the 2 Sided Book Copying feature. [Remedy] Check the 2 Sided Book Copying settings. Refer to "Layout Adjustment" (P.94). 610