Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 487
Installation When Using EtherTalk, Step 1 Preparations, Step 2 Configuration on the Machine
View all Dell C7765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 487 highlights
Installation When Using EtherTalk Installation When Using EtherTalk This section describes how to install the machine using EtherTalk. The following shows the reference section for each procedure. Step 1 Preparations...487 Step 2 Configuration on the Machine 487 Step 3 Configuration on the Computer 488 Dell Printer Configuration Web Tool Setting Items 488 Step 1 Preparations The following items are required to set up the machine to use the EtherTalk interface. • EtherTalk network environment Step 2 Configuration on the Machine The following describes the configuration procedures to use EtherTalk on the machine. Note • You can configure the settings using Dell Printer Configuration Web Tool. For the items that can be configured using Dell Printer Configuration Web Tool, refer to "Dell Printer Configuration Web Tool Setting Items" (P.488). 1 Display the [Tools] screen. 1) Press the button. 2) Enter the system administrator's user ID with the numeric keypad or the keyboard displayed on the screen, and select [Enter]. When a passcode is required, select [Next] and enter the system administrator's passcode, and select [Enter]. Note • The default user ID is "admin". • The default passcode is "1111". 3) Select [Tools] on the [Home] screen. 2 Enable the EtherTalk port. 1) Select [Connectivity & Network Setup]. 2) Select [Port Settings]. 3) Select [EtherTalk], and then select [Change Settings]. 4) Select [Port Status], and then select [Change Settings]. 5) Select [Enabled], and then select [Save]. 3 Select [Close] repeatedly until the [Tools] screen is displayed. 4 Select [Close]. Note • Rebooting the machine may be required depending on the settings. When a message displayed on the screen, follow the message and reboot the machine. 5 Print a configuration report to confirm that the EtherTalk port is enabled. For information on how to print a configuration report, refer to "Print Reports" (P.276). 6 Configure other EtherTalk settings as necessary. For information on the EtherTalk settings, refer to "Dell Printer Configuration Web Tool Setting Items" (P.488). 487