Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 400

15 Tools Memory Full Procedure If there is insufficient hard disk memory while scanning a document, a screen appears asking you how you want to handle the partially stored data. Set the process you want the machine to perform for the partially stored data after a certain time has elapsed in the confirmation screen. You can set the time until the memory full procedure is carried out. For more information, refer to "Auto Job Release" (P.315). Delete Job Deletes the data partially stored. Run Job Treats the read-in data as valid, and start scanning the document partially stored. Maximum Stored Pages Set the maximum number of pages stored for a fax document. You can specify from 1 to 999 pages. Mixed Size Originals Scan Mode Set the scan mode when the machine scans documents of various sizes simultaneously with the document feeder. If only documents of standard sizes are to be scanned, we recommend that you select [Standard Size Mode]. Note • When [Standard Size Mode] is selected, image loss may occur if the following types of documents are scanned: - Non-standard size documents - B4 size documents with the inch series setting in [Paper Size Settings]. Skip Blank Pages Set whether or not to detect blank pages while scanning 2 sided documents and transmits only pages that are not blank. Note • This feature is for service representative use. For more information, contact Customer Support at dell.com/contactdell. Fax Data in Folder Priority 1 to 3 Set the priority to display the fax information received using folders. For instance, when using Dell Network Scanner Utility 3, the fax information is displayed in the [Recipient] section of the file list screen. There are priority levels from 1 to 3. All priority can be set, however, if you want to display only one priority level, make the settings of all priority levels the same. Direct Fax Set whether or not to receive a fax, which is instructed using a fax driver from a computer. When you select [Disabled], the Direct Fax feature becomes unavailable. Block Inbound Faxes Set a G3-ID (fax number) from which you want to reject a fax reception. You can specify up to 50 G3-IDs. You can find the G3-ID of the sender that you want to reject in "Remote Station" column of an Activity Report or "Input Source" column of a Job History Report. 400