Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 398

15 Tools Saved Faxes - Auto Delete When [Yes] is selected for [Save Undelivered Faxes], set whether or not to automatically delete saved faxes in 24 hours. Transmission Interval Specify a value for the interval between the end of one transmission and the beginning of the next, from 3 to 255 seconds in 1 second increments. A longer transmission interval increases the total time to send a broadcast transmission, but allows calls to be received during the standby time. Batch Send When the machine stores multiple faxes addressed to a destination, enabling the Batch Send feature allows you to send them all at the same time in a single fax transmission. By using this feature, you can reduce your communication costs. Select whether or not to enable the Batch Send feature. Note that a batch send is not available for manual transmissions, broadcasts, relay broadcasts, remote folder, and delayed start transmission with a specified time before the specified time. When a redial, resend, delayed start transmission job, or the Authentication feature is used and different users send to the same address, a batch send is not possible. Manual Send/Receive Default When on-hook or off-hook is used when sending a fax, select either [Manual Receive] or [Manual Send]. Fax Receiving Mode Set the default value for [Fax Receiving Mode] in the [Machine Information] screen displayed by pressing the button. Select whether or not to receive a fax automatically or manually. Border Limit Set the length to make a page break that will be applied when the length of a received fax document is longer than the paper length. You can specify a value from 0 to 127 mm in 1 mm increments. This setting can conveniently be used together with the following Auto Reduce on Receipt feature. Auto Reduce On Receipt When the length of a received fax document exceeds the paper length but is within the page break threshold value, select whether or not to automatically reduce the image to fit the page. This setting can conveniently be used together with the Border Limit feature. If you select [No], the part of the image beyond the paper length is ignored. Receiving Paper Size Set the method of notifying the paper size on which the received fax document will be printed, from the receiver to the sender. 398