Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 673

Status Code Status Code 116-390 116-391 116-392 116-393 116-394 116-395 116-396 116-397 116-399 116-702 116-703 116-704 116-705 116-706 116-707 116-708 116-709 116-710 116-713 116-714 116-716 116-717 116-720 116-738 116-739 Cause and Remedy [Cause] An error occurred in the machine. [Remedy] Follow the message displayed on the touch screen and initialize the memory of the machine. [Cause] An error occurred in the machine. [Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. If the same message is displayed again, contact Customer Support at dell.com/contactdell. [Cause] A print job was processed using a substitute font. [Remedy] Check the print data. [Cause] Probable causes are as follows: 1)An error occurred during PostScript processing. 2)An error occurred because of insufficient memory for PostScript processing. [Remedy] For 1), check the print data. For 2), increase the value for [PostScript Memory]. [Cause] An error occurred when reading data on the media. [Remedy] Check whether the media is inserted correctly. [Cause] An error occurred when reading data on the media. [Remedy] Use a computer to confirm the content recorded on the media. [Cause] The correct document size could not be judged because the receive data exceeded the HP-GL/2 spool size. [Remedy] Increase the size assigned to HP-GL/2 auto layout memory. [Cause] The data has been divided into a number of jobs because of insufficient disk space. [Remedy] Delete unnecessary data from the hard disk to free up disk space. [Cause] An HP-GL/2 command error occurred. [Remedy] Check the print data. [Cause] An error occurred when reading the data on the media. [Remedy] On a computer, confirm the content recorded on the media. [Cause] An error occurred during print processing because of insufficient memory. [Remedy] Stop unnecessary ports or delete unnecessary data to free up disk space. [Cause] The size and orientation of the form specified are not matched with the paper to be printed. [Remedy] Match the size and orientation of the paper with the form specified, and print again. [Cause] The form or logo data cannot be registered because memory for the form and logo data or memory capacity for the hard disk is insufficient. [Remedy] Delete unnecessary data, or free up the space for the form memory. 673