Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 483
Installation When Using Microsoft Network (SMB), Step 1 Preparations, Step 2 Configuration on
View all Dell C7765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 483 highlights
Installation When Using Microsoft Network (SMB) Installation When Using Microsoft Network (SMB) This section describes how to install the machine using Microsoft Network (SMB). The following shows the reference section for each procedure. Step 1 Preparations...483 Step 2 Configuration on the Machine 483 Step 3 Configuration on the Computer 484 Dell Printer Configuration Web Tool Setting Items 484 Step 1 Preparations The following items are required to set up the machine to use Microsoft Network (SMB). • NetWare server • TCP/IP or NetBEUI network environment • The Driver CD Kit (provided with the machine) Step 2 Configuration on the Machine The following describes the configuration procedures to use Microsoft Networks (SMB) on the machine. Enable the LPD Port, and then configure TCP/IP settings. Note • You can configure the settings using Dell Printer Configuration Web Tool. For the items that can be configured using Dell Printer Configuration Web Tool, refer to "Dell Printer Configuration Web Tool Setting Items" (P.484). 1 Display the [Tools] screen. 1) Press the button. 2) Enter the system administrator's user ID with the numeric keypad or the keyboard displayed on the screen, and select [Enter]. When a passcode is required, select [Next] and enter the system administrator's passcode, and select [Enter]. Note • The default user ID is "admin". • The default passcode is "1111". 3) Select [Tools]. 2 Enable the SMB port. 1) Select [Connectivity & Network Setup]. 2) Select [Port Settings]. 3) Select [SMB], and then select [Change Settings]. 4) Select [Port Status], and then select [Change Settings]. 5) Select [Enabled], and then select [Save]. 6) Select [Close] repeatedly until the [Tools] screen is displayed. 3 Set an IP address and the other addresses. Skip this step if an IP address is already set. If DHCP or BOOTP is available in your environment, configure the method for obtaining the address. The configuration of an IP address, a subnet mask, and a gateway address is not required. 483