Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 624
than [Auto Paper Off] in [Paper Type Priority]., Refer to Paper Type Priority P.323.
View all Dell C7765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 624 highlights
23 Problem Solving Status Code 016-718 016-719 016-720 016-721 016-722 016-723 016-724 016-725 016-727 016-728 016-729 016-731 016-732 Cause and Remedy [Cause] Unable to process the PCL print data because of insufficient memory. [Remedy] Reduce the resolution, or cancel 2 sided printing or N up feature, and then print again. [Cause] Unable to process the PCL print data because of insufficient print page buffer. [Remedy] Increase the size of the print page buffer. [Cause] An invalid command is included in PCL print data. [Remedy] Confirm the print data and try printing again. [Cause] An error occurred during print processing. Probable causes are as follows: 1)Printing was instructed by the Auto Paper selection when [Paper Type Priority] is set to [Auto Paper Off] for all paper in the [Common Service Settings]. 2)ESC/P-K command error occurred. [Remedy] For 1), when printing by the Auto Paper selection, set one of the paper types to other than [Auto Paper Off] in [Paper Type Priority]. For 2), confirm the print data. Refer to "Paper Type Priority" (P.323). [Cause] The specified staple position is not supported by the machine, or the paper size specified is not supported by the finisher. [Remedy] Confirm the staple position and the paper size, and try printing again. [Cause] The specified punch position is not supported by the machine, or the paper size specified is not supported by the finisher. [Remedy] Confirm the punch position and the paper size, and try printing again. [Cause] The specified staple and punch position combination is unsupported. [Remedy] Specify the staple and punch positions on the same side, and try printing again. [Cause] A scanned document stored in a folder was to be sent by fax using the Job Flow feature, but the file in the folder could not be converted to fax data. [Remedy] Do not use the Job Flow feature. Simply scan the document from the machine's [Fax] screen to send it by fax. [Cause] A print job was cancelled without storing a file into a folder because the file was determined as not containing any pages. [Remedy] The file could not be stored into the folder because the machine determined the print file as not containing any pages. Disable [Skip Blank Pages] on the [Advanced] tab on the print driver, or add text to the file if the file is blank. [Cause] An unsupported tag is included in the TIFF file. [Remedy] Confirm the print data. [Cause] Unable to print because the number of colors or the resolution of the TIFF file exceeds the allowed range. [Remedy] Change the number of colors or resolution for the TIFF file, and execute the operation again. [Cause] Unable to print TIFF data because it was interrupted. [Remedy] Retry printing. [Cause] The form specified by emulation has not been registered at the host side. [Remedy] Resend the form data. 624