Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 675
Local Folder or Store Internet Fax - Local Folder feature
View all Dell C7765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 675 highlights
Status Code Status Code 116-790 117-312 117-326 117-331 117-332 117-333 118-310 118-311 121-311 121-314 121-316 121-318 121-319 121-320 121-321 121-322 121-323 121-324 121-333 Cause and Remedy [Cause] Probable causes are as follows: 1)If the operator cancelled printing a document that was received using the Store Fax Local Folder or Store Internet Fax - Local Folder feature: The first set of the document is not stapled. 2)For causes other than 1) No set of the document is stapled. [Remedy] For 1), manually staple the first set of the document. Or, do not cancel printing of a document that is received using the Store Fax - Local Folder or Store Internet Fax Local Folder feature. For 2), check whether the staple position has been correctly specified, and try printing again. [Cause] An error occurred in the machine. [Remedy] Contact Customer Support at dell.com/contactdell. [Cause] An error occurred in the machine. [Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. If the same message is displayed again, contact Customer Support at dell.com/contactdell. [Cause] An error occurred in the machine. [Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. If the same message is displayed again, contact Customer Support at dell.com/contactdell. [Cause] An error occurred in the machine. [Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. If the same message is displayed again, contact Customer Support at dell.com/contactdell. [Cause] An error occurred during software processing. [Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. If the same message is displayed again, contact Customer Support at dell.com/contactdell. [Cause] An error occurred between the machine and the device connected. [Remedy] Once a smart card reader is connected to the machine, the machine automatically changes the [Passcode Entry for Smart Card Login] setting to [On] under [Tools] > [Authentication / Security Settings] > [Authentication] > [Passcode Policy]. Change the setting as required. [Cause] An error occurred between the machine and the device connected. [Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. If the same message is displayed again, contact Customer Support at dell.com/contactdell. [Cause] An error occurred between the machine and the device connected. [Remedy] Confirm that the device is switched on, and then switch off the machine power, make sure that the touch screen is blank, and switch on the machine power. If the error still is not resolved, contact Customer Support at dell.com/contactdell. 675