Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 315
NTP Time Synchronization, Connection Interval, Time Server Address, Auto Clear, Auto Job Release
View all Dell C7765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 315 highlights
2 Select the time format. 3 When you select [12 Hour Clock], set [AM] or [PM]. 4 Specify [Hours] and [Minutes]. 5 Select [Save]. Common Service Settings NTP Time Synchronization You can synchronize the machine clock with a time server (NTP: Network Time Protocol), receiving time information from the server. To connect to a time server, select [On] for [NTP Time Synchronization], and set the IP address of the time server in [Time Server Address]. Connection Interval Select the time interval to connect to the time server. You can select from 1 to 500 hours in 1 hour increments. Time Server Address Set the server name or IP address of the time server. Note • For IPv4, enter the IP address in xxx.xxx.xxx.xxx format, where "xxx" is a value between 0 and 255. • For IPv6, enter the IP address in xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx format, where "xxxx" is a hexadecimal number. Auto Clear Specify the time lapsed without any operation until the machine resets the settings automatically. When you select [On], specify a value between 10 and 900 seconds in 1 second increments. To disable this feature, select [Off]. Note • When [Off] is selected, the machine will cancel the standby status and begin processing a document after one minute has elapsed in anticipation of a job command. • The timer does not start counting until the operator leaves the detectable area of the wakeup motion sensor. Auto Job Release Specify the time lapsed until the machine cancels the active job and starts the next job if an error such as document or paper jams and running out of paper occurs during copying or scanning. In that case, only those jobs not affected by the error can be processed. When you select [On], specify a value in 1 minute increments. To disable this feature, select [Off]. Auto Print Set the time period to start the next print job after the operation of the control panel (except for the and buttons) after the end time of the Printer Lockout Duration passed. When you select [On], specify a value between 1 and 240 seconds in 1 second increments. When you select [Off], printing starts immediately after the machine is ready. 315