Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 363

Connectivity & Network Setup ThinPrint Port Status You can use the machine for print in the ThinPrint environment. The machine decompresses and prints the compressed print data sent from the server. Select [Enabled] when you use ThinPrint®. Port Number Enter a port number for ThinPrint from 1 to 65535. The default value is 4000. Note • Do not use any numbers assigned to the other ports. • ThinPrint is available when the communication protocol uses IPv4. • The maximum of three connections are possible at a time. Protocol Settings Set the parameters required for communications. In [Protocol Settings], you can set the following items. Ethernet Rated Speed Set the communication speed for the Ethernet interface. Auto (Up to 100 Mbps) Select this to detect the Ethernet transmission rate up to 100 Mbps automatically. 100 Mbps Full-Duplex Select this to set 100BASE-TX (Full Duplex) as the default value. 100 Mbps Half-Duplex Select this to set 100BASE-TX (Half Duplex) as the default value. 10 Mbps Full-Duplex Select this to set 10BASE-T (Full Duplex) as the default value. 10 Mbps Half-Duplex Select this to set 10BASE-T (Half Duplex) as the default value. Auto (Up to 1 Gbps) Select this to detect the Ethernet transmission rate up to 1 Gbps automatically. 1000 Mbps Select this to set 1000BASE-T as the default value. TCP/IP - IP Mode Allows you to select the TCP/IP operation mode. IPv4 Mode Select this option for IPv4. 363