Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 794
> [Plug-in Settings] > [List of Embedded Plug-ins] > [GoogleDriveLib]
View all Dell C7765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 794 highlights
29 Using Access Google Drive™ Status Code 02-101 02-201 02-202 02-203 02-301 02-302 02-303 03-301 04-301 04-303 04-304 Cause and Remedy [Cause] The required plugin is disabled. [Remedy] Check the following settings from Dell Printer Configuration Web Tool: 1) Make sure that [Enabled] is checked in [Properties] > [Security] > [Plug-in Settings] > [Plug-in Settings]. 2) Make sure that [Activated] is displayed for [Status] in both [Properties] > [Security] > [Plug-in Settings] > [List of Embedded Plug-ins] > [GoogleDriveLib] and [GoogleDrive]. Note • If the machine power is turned off at an unexpected timing, plug-in may automatically be invalid. [Cause] Since Port 9100 is disabled, this feature could not be started. [Remedy] Enable Port 9100. Also enable SOAP port, and check that SOAP port number is set to 80. [Cause] Since SOAP port is disabled, this feature could not be started. [Remedy] Enable SOAP port. Also check that the SOAP port number is set to 80, and that Port 9100 is enabled. [Cause] Since the SOAP port number is incorrect, this feature could not be started. [Remedy] Check that the SOAP port number is set to 80, and that Port 9100 is enabled. [Cause] Since the proxy setting or DNS setting is incorrect, proxy server or DNS name resolution for the cloud service failed. [Remedy] Check that the proxy setting and DNS setting are correct. [Cause] An error occurred during proxy server authentication. [Remedy] Check that the user name and password for proxy server authentication are correct. [Cause] A communication error occurred between the proxy server and the cloud service. [Remedy] From a computer on the same network, access to the cloud service to check that no filter setting is enabled. [Cause] The network is terminated. Probable causes are as follows: 1) A network cable has been pulled out. 2) Proxy setting is required, but has not been set. 3) The cloud server has a trouble. [Remedy] For 1, confirm that the network cables are connected. For 2, check the proxy setting for the machine. For 3, wait for a while, and then execute the operation again. [Cause] Cannot log in to the cloud service. [Remedy] Delete the job flow sheet for automatic uploading, and create a job flow sheet again. [Cause] The cloud service account does not exist. [Remedy] From a computer or other platforms, access the cloud service and create an account. [Cause] The user does not have the right to access the selected folder. [Remedy] From a computer or other platforms, log in as a user authorized to change the access setting for the folder. Then enable the user access. 794