Dell PowerConnect Brocade M6505 Brocade 7.1.0 Web Tools Administrator's Guide - Page 143

Zone configuration and zoning database management 8 NOTE All switches in the fabric must be running Fabric OS v6.4.0 or later and all the ports in the TI zones must be in the same failover mode. 7. Optional: Repeat steps 5 and 6 to add more elements to your TI zone. 8. When you are finished, click OK. The Traffic Isolations Zones window displays. 9. Click Apply to save the TI zone configuration. Zone configuration and zoning database management A zone configuration is a group of zones; zoning is enabled on a fabric by enabling a specific configuration. You can specify members of a configuration using zone names. Figure 27 displays a sample zoning database and the relationship between the zone aliases, zones, and zoning configuration. The database contains one zoning configuration, myconfig, which contains two zones: Zone A and Zone B. The database also contains four aliases, which are members of Zone A and Zone B. Zone A and Zone B also have additional members other than the aliases. Zone Configuration: myconfig Zone A Alias 1 WWN 1; WWN 2; WWN 3 Alias 2 WWN 4; Other Elements Alias 3 WWN 5 Zone B Alias 4 WWW 5; WWN 6; WWN7 Other Elements WWW 9 FIGURE 27 Sample zoning database Web Tools Administrator's Guide 115 53-1002756-01