Dell PowerConnect Brocade M6505 Brocade 7.1.0 Web Tools Administrator's Guide - Page 176

11 Access Gateway limitations on the Brocade 8000 • Click Manual Balancing and a confirmation dialog box displays. Click Yes to change F Port-N Port Mapping or click No to cancel the changes. 7. Click Apply to apply the changes. Access Gateway limitations on the Brocade 8000 The following list the is a compilation of the limitations of using Access Gateway with the Brocade 8000 switch: • Only the Port Grouping (PG) policy is supported. When the Access Gateway mode is first enabled, the default PG policy is enforced. • When the Brocade 8000 runs in Access Gateway mode, all the FCoE ports are F_Ports and all the FC port are N-Ports. • Static mapping is not supported on the Brocade 8000. • When Access Gateway is enabled, F Ports mapping to N Ports is allowed and all 4 FCOE ports in the trunk group are mapped to the same N Port. • F Ports mapping to the Port Group level is not allowed. • You cannot map individual FCoE Ports within the same trunk group to different FC ports. • All the four FCoE ports in a set will failover or failback to one FC N Port. • Enabling or disabling of N-port Port Grouping is not allowed • Port Group modification is allowed • Login Balancing and Fabric Name Monitoring is not allowed in Add Port Group configuration. • Login Balancing, Fabric Name Monitoring, F Port Auto Rebalancing, N Port Auto Rebalancing, and Manual Balance options are not allowed in the Edit Port Group or View Port Group configuration. 148 Web Tools Administrator's Guide 53-1002756-01