Dell PowerConnect Brocade M6505 Brocade 7.1.0 Web Tools Administrator's Guide - Page 38
Opening Web Tools
View all Dell PowerConnect Brocade M6505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
1 Opening Web Tools Opening Web Tools You can open Web Tools on any workstation with a compatible Web browser installed. For a list of Web browsers compatible with Fabric OS v7.1.0, refer to Table 3. Web Tools supports both HTTP and HTTPS protocol. To open Web Tools, perform the following steps. 1. Open the Web browser and enter the IP address of the device in the Address field, such as: http://10.77.77.77 or https://10.77.77.77 2. Press Enter. The Web Tools login dialog box displays. Refer to "Logging in" on page 11 for more information. NOTE If you are using Firefox, the browser window is left open. You can close it anytime after the login dialog box displays. If you are using Internet Explorer, the browser window automatically closes when the login dialog box displays. NOTE If you have installed EZSwitchSetup on your workstation, the EZSwitchSetup Switch Manager displays the first time you access the device. EZSwitchSetup provides an easy to use wizard interface that may be used to simplify the initial setup procedure for smaller switches. Refer to EZSwitchSetup Administrator's Guide for information about the EZSwitchSetup interface. If you want to use Web Tools instead of EZSwitchSetup, click Advanced Management in the lower-left corner of the window to open the Web Tools interface. This book describes only the Web Tools interface. 10 Web Tools Administrator's Guide 53-1002756-01