Dell PowerEdge M710 Web Tools Administrator’s Guide - Page 250

17 SNMP configuration DRAFT: BROCADE CONFIDENTIAL 6. Make the appropriate changes and click OK. Setting the Switch Policy Authentication mode This setting determines whether or not authentication is required when a switch logs in to a fabric. Use the following procedure to set the Switch Policy Authentication mode. 1. Open the Switch Administration window as described in "Opening the Switch Administration window" on page 35. 2. Select the Security Policies tab. 3. Select Authentication on the Security Policies menu. 4. Use the Switch Policy Authentication Mode option to select the authentication policy. SNMP configuration This section describes how to manage the configuration of the SNMP agent in the switch. The configuration includes SNMPv1 and SNMPv3 configuration, accessControl, and systemGroup configuration parameters. Access is read-only if you do not have admin or security admin authority. For more information, refer to the snmpConfig command in the Fabric OS Command Reference. Setting SNMP trap levels Use the following procedure to set SNMP trap levels. 1. Open the Switch Administration window as described in "Opening the Switch Administration window" on page 35. 2. Select the SNMP tab. 3. Select a trap level for a recipient from the corresponding Trap Level menu in the SNMPv1 and SNMPv3 sections. The level you select identifies the minimum event level that prompts a trap. NOTE Adding or editing the user name can be done only through the CLI and by selecting a user name from the User Name menu in the SNMPv3 section. 4. Click Apply. Changing the systemGroup configuration parameters Use the following procedure to change the systemGroup configuration parameters. 1. Open the Switch Administration window as described in "Opening the Switch Administration window" on page 35. 2. Select the SNMP tab. 222 Web Tools Administrator's Guide 53-1001772-01