Dell PowerEdge M710 Web Tools Administrator’s Guide - Page 279
Copying a CUP port connectivity configuration, CUP logical path configuration
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
DRAFT: BROCADE CONFIDENTIAL CUP logical path configuration 18 4. Optional: Click Active=Saved Mode to enable (selected) or disable (not selected) the Active=Saved FMS parameter after the configuration is activated. 5. Click Yes to activate the configuration or click No to cancel the activation. Copying a CUP port connectivity configuration Use the following procedure to copy a CUP port connectivity configuration to a new configuration. 1. Display the CUP port connectivity configuration list. 2. Select a saved configuration or the active configuration from the list. 3. Click Copy. The Copy CUP Port Connectivity Configuration dialog box displays. 4. In the dialog box, enter a name and description for the new configuration and click OK to save the configuration to the target file; click Cancel to cancel copying the configuration. The file name must be in alphanumeric characters and can contain only dashes or underscores as special characters. Deleting a CUP port connectivity configuration Use the following procedure to delete a saved CUP port connectivity configuration. 1. Display the CUP port connectivity configuration list. 2. Select the saved configuration from the list. 3. Click Delete. The Delete CUP Port Connectivity Configuration confirmation dialog box displays. 4. Click Yes to delete the selected configuration; click No to cancel the deletion. CUP logical path configuration The logical reporting path is a CUP mechanism for sending FRU-failure type reports to a FICON Logical Path via the FICON Protocol. Viewing CUP logical path configurations Use the following procedure to display a list of CUP logical path configurations. 1. Select a FICON-enabled switch from the Fabric Tree. 2. Select Tasks > Manage > Switch Admin. 3. Click Show Advanced Mode to see all the available tabs and options. 4. Select the FICON CUP tab. The FICON CUP page displays the FICON Management Server page in front. All attributes on this page are read-only until FMS mode is enabled. 5. Click the CUP Logical Paths subtab. Web Tools Administrator's Guide 251 53-1001772-01