Epson Stylus Pro 5500 User Manual - Page 24
Loading Paper, Charging takes about 6 minutes. Do not turn off the printer or interrupt
View all Epson Stylus Pro 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Setting Up the Printer | 1-7 6. Close the clamp until it clicks into place. The corresponding H ink out light goes out. Repeat steps 3 through 6 for the other ink cartridges. Caution Never turn off the printer or open the paper path cover on the back when the P Operate light is flashing. However, if the light is still flashing after 15 minutes and the printer is not moving or making noise, you may turn off the printer. Note See Chapter 2 for instructions on using the manual feed slots. 7. Make sure all the H ink out lights are off, then close the ink compartment doors. The printer begins charging the advanced ink delivery system. The P Operate light flashes and the printer makes various sounds. Charging takes about 6 minutes. Do not turn off the printer or interrupt this important process or you'll use up more ink than necessary. The P Operate light stops flashing when the ink charging process is finished. Loading Paper Your EPSON Stylus Pro 5500 printer has four paper paths: one for the standard paper tray, one for the optional lower paper cassette, and two for the manual feed slots. Follow these steps to load paper in one of the paper trays: 1. Pull the paper tray out until you feel some resistance. You can also pull the tray all the way out of the printer to load paper. 1-7