Epson SureColor S50670 User Manual - Page 100
Additional Dryer, Heater Temperature, After heater: 50 °C 122 °F
View all Epson SureColor S50670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Platen heater: 40 °C (104 °F) After heater: 50 °C (122 °F) Heater status can be viewed in the control panel. See "Understanding the Display" on page 22. Additional Dryer defaults to On; at this setting, the fan turns on automatically when printing starts. Additional Dryer is available only when an additional print drying system is connected (system included with the S50670 and optional with other models). The following gives the procedure used when the optional additional print drying system is installed. Note: ❏ Temperature and Additional Dryer settings can be stored separately for each media type. See "Saving Optimal Settings for the Current Media (Print Media Settings)" on page 92. ❏ The time needed for the heaters to reach the specified temperatures varies with the ambient temperature. 1. After checking that the printer is ready, press the button to display the Heating & Drying menu. 2. Use the d/u buttons to select the desired option and press the Z button. 3. Choose a value. Heater Temperature (1) You can set the temperatures of the pre-heater, platen heater, and after heater. (2) Use the r/l buttons to select a heater. From left, the options are pre-heater, platen heater, and after heater. (3) After selecting the desired heater, use the d/u buttons to choose the temperature. (4) Select the desired option and press the Z button. Basic Operations 100