Epson SureColor S50670 User Manual - Page 58
Loading Media - S30670, When the Heavy Roll Media Feeding Unit is installed
View all Epson SureColor S50670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Important: ❏ Do not use the media holding plates with media that is more than 0.4 mm (0.02 inch) thick. The media holding plates could touch and damage the print head. ❏ Move the media holding plates to the left and right edges of the platen when they are not in use. ❏ Do not use the media holding plates if the sides of the printed media are smudged or torn. ❏ Leave left and right margins of over 10 mm (0.39 inch) when using the media holding plates. Narrower margins could result in printer printing over the plates (this does not apply when ink layering is used). 20. Close the front cover. Loading Media - S30670 The procedure for loading media varies depending on whether you are using the installed media feeding unit or the optional heavy roll media system. Follow the steps below when using the supplied media feeding unit. When the Heavy Roll Media Feeding Unit is installed, see "Using the Optional Heavy Roll Media Feeding Unit" on page 68. When the Standard Media Feeding Unit Is Installed This section describes how to load media when the standard media feeding unit is installed. c Caution: ❏ Because the media is heavy, it should not be carried by one person. When loading or removing the media, use at least two persons. 1. Turn on the printer by pressing the P button. 2. Loosen the roll holder fixing screws and adjust the roll holders so that the gap between the two is wider than the media. Basic Operations 58