Epson SureColor S50670 User Manual - Page 152

Details of the Menu Items or values marked with a superscript "1" apply to the S70670 and S50670, while items marked with a superscript "2" are available with the S50670 only. Items marked with a superscript "3" are not supported on the S70670. The Media Setup Menu The Media Setup menu can be accessed directly by pressing the M button. indicates default settings. Media Remaining Item Remaining Setup Length Remaining Alert Print Remaining Length Select Media Parameter On Off 5.0 to 99.5 m (15 to 300 ft) 1 to 15 m (4 to 50 ft) Print Explanation Choose On to display and record, or Off to not display and not record, the amount of media remaining. Length, Remaining Alert, and Print Remaining Length options are available when On is selected. The display panel shows the amount of media remaining based on the value selected for Length and the amount of media used during printing. Enter a value for overall roll length between 5.0 and 99.5 m (15 to 300 ft). You can set in 0.5m (1ft) increments. An alert will be displayed if the amount of media remaining reaches this length. Choose from values between 1 and 15 m (4 and 50 ft). You can set in 0.5m (1ft) increments. Use Print Remaining Length to print the amount of media remaining on the current roll before replacing it with another type of media. You can then enter this number as the media length the next time the roll is used. Parameter RIP Settings 1 to 30 (media setting bank number) Explanation Choose the media settings used for printing. If RIP Settings is selected, the media settings selected in the software RIP will be used. Select a number between 1 and 30 to use the settings in the corresponding media setting bank. Use Customize Settings to create media setting banks. Using the Control Panel Menu 152