Epson SureColor S50670 User Manual - Page 82
Using the Auto Take-up Reel Unit, Media Loading and Take Up
View all Epson SureColor S50670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Note: If you are using the auto take-up reel unit, set the Auto switch on the auto take-up reel unit to Off before using the Manual switch to position the media over the cutting groove. If you are using the S70670 or S50670 and do not intend to make additional prints, raise the media loading lever to prevent deformation of the pressure rollers. Removing Media You can now remove the media from the roll holders. To remove the media, reverse the steps you followed to load it. Using the Auto Take-up Reel Unit Media Loading and Take Up The auto take-up reel unit automatically takes up media as it is printed, improving the efficiency of unmanned operation. The auto take-up reel unit for this printer can take up media in either of the following directions. Counterclockwise Clockwise Counterclockwise take up places the printed surface on the outside of the roll. Clockwise take up places the printed surface on the inside of the roll. The explanation that follows uses the supplied auto take-up reel unit for illustrative purposes, but the same procedure can be followed when using the optional auto take-up reel unit for heavy media. Basic Operations 82