Epson SureColor S50670 User Manual - Page 177

Product Waste Ink Bottle Media Holding Plate High Speed Dryer Heavy Roll Media System Part number T724000 C12C890891 C890751 C12C890761 Explanation Identical to the waste ink bottle supplied with the printer. Identical to the media holding plate supplied with the printer. Uses a fan to blow air over the media and assist drying (included with the S50670). See "The Media Setup Menu" on page 152. A media feeding unit and auto take-up reel for heavy rolls (up to 80 kg or 176.4 lb). Supported Media The following media can be used with the printer. Print quality is greatly affected by the type and quality of media used. Choose a media suited to the task at hand. For information on use, refer to the documentation supplied with the media or contact the manufacturer. We recommend that you print a test run and check the results before purchasing media in large quantities. Important: Do not use media that is wrinkled, scuffed, torn, or dirty. Note: Ink layering is not available with some media types, such as banner and canvas. Standard Roll Media System Roll core size Roll outer diameter Media width Media thickness Roll weight 2 or 3 inch Up to 250 mm (9.8 inches) 300* to 1626 mm (11.8 to 64 inches) Up to 1 mm (0.04 inch) Up to 40 kg (88.2 lb) *Minimum media width for ink layering is 508 mm (20 in.) Heavy Roll Media System Roll core size Roll outer diameter Media width Media thickness Roll weight 2 or 3 inch Up to 300 mm (11.8 inches) 300 to 1626 mm (11.8 to 64 inches) Up to 1 mm (0.04 inch) Up to 80 kg (176.4 lb) Appendix 177