Epson SureColor S50670 User Manual - Page 16
Pressure rollers high, Platen heater, Wiper cleaner, Wiper, Flushing pad
View all Epson SureColor S50670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
4 Pressure rollers (high) There are ten rollers in total; the high pressure rollers are the two on the outside edges. They press down on the edges of the media during ink layering. See "Cleaning the Platen Heater, Pressure Rollers, and Media Holding Plates" on page 112. See "High Print Quality" on page 27. 5 Pressure rollers (low) There are ten rollers in total; all of which are low pressure rollers apart from the two on the outside edges. They press down on the media during normal (non-layer) printing. The number used varies with the width of the media. See "Cleaning the Platen Heater, Pressure Rollers, and Media Holding Plates" on page 112. 6 Platen heater The platen heater ensures that the ink adheres evenly. See "Heating & Drying" on page 97. See "Cleaning the Platen Heater, Pressure Rollers, and Media Holding Plates" on page 112. 7 Wiper cleaner The wiper cleaner removes ink from the wiper. It is included in the maintenance kit and needs to be replaced about once every six months. See "Replacing the Wiper and Wiper Cleaner" on page 135. 8 Caps Except during printing, these caps cover the print head nozzles to prevent them drying out. We recommend that this unit be cleaned once a week. See "Regular Part Cleaning" on page 124. 9 Wiper The wiper removes ink from the print head nozzles. We recommend that this unit be cleaned once a week. It is included in the maintenance kit and needs to be replaced about once every six months. See "Regular Part Cleaning" on page 124. See "Replacing the Wiper and Wiper Cleaner" on page 135. 10 Flushing pad Ink is discharged onto this pad during flushing. It is It is included in the maintenance kit and needs to be replaced about once every six months. See "Replacing the Flushing Pad" on page 138. Introduction 16