Epson SureColor S50670 User Manual - Page 175
Others, Heaters Turn off or the Optional Additional Print Drying System Stops
View all Epson SureColor S50670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Important: If the printer is left off for an extended period, the print head will be left uncapped and dry out, and will not print properly when printing resumes. Turning the printer on automatically caps the print head. Reload the media and resume printing. See "Loading Media - S70670/S50670" on page 39 or "Loading Media - S30670" on page 58. Others Heaters Turn off or the Optional Additional Print Drying System Stops o The pre-, platen, and after heaters will turn off if no print job is received for some time and no error occurs. The time before the heaters turn off automatically can be selected using the Heat Off Timer option in the setup menu. See "Printer Setup Menu" on page 156. The heaters will be reactivated when a print job is received, the media loading lever is used, or another operation involving printer hardware is performed. An additional print drying system is included with the S50670. The control panel display keeps turning off. o Is the printer in sleep mode? The printer enters sleep mode when the Heat Off Timer expires and the heaters turn off. The time before the heaters turn off can be selected in the Printer Setup menu. See "Printer Setup Menu" on page 156. The heaters will be reactivated and sleep mode will end when a print job is received, the media loading lever is used, or another operation involving printer hardware is performed. The red light is on inside the printer. o This is not a failure. The red light is a sensor and normally stays on inside the printer. Problem Solver 175