HP BladeSystem bc2800 Embedded Web System User Guide for the HP BladeSystem PC - Page 191
Configuring RMON Events
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Viewing Statistics ❏ Owner - Displays the RMON station or user that requested the RMON information. The field range is 0-20 characters. ❏ Sample No.- Indicates the sample number from which the statistics were taken. ❏ Received Bytes (Octets) - Displays the number of octets received on the interface since the device was last refreshed. This number includes bad packets and FCS octets, but excludes framing bits. ❏ Received Packets - Displays the number of packets received on the interface since the device was last refreshed, including bad packets, Multicast and Broadcast packets. ❏ Broadcast Packets - Displays the number of good Broadcast packets received on the interface since the device was last refreshed. This number does not include Multicast packets. ❏ Multicast Packets - Displays the number of good Multicast packets received on the interface since the device was last refreshed. ❏ CRC Align Errors - Displays the number of CRC and Align errors that have occurred on the interface since the device was last refreshed. ❏ Undersize Packets - Displays the number of undersized packets (less than 64 octets) received on the interface since the device was last refreshed. ❏ Oversize Packets - Displays the number of oversized packets (over 1518 octets) received on the interface since the device was last refreshed. ❏ Fragments - Displays the number of fragments (packets with less than 64 octets, excluding framing bits, but including FCS octets) received on the interface since the device was last refreshed. ❏ Jabbers - Displays the total number of received packets that were longer than 1518 octets. This number excludes frame bits, but includes FCS octets that had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral octet (Alignment Error) number. The field range to detect jabbers is between 20 ms and 150 ms. ❏ Collisions - Displays the number of collisions received on the interface since the device was last refreshed. ❏ Utilization - Displays the percentage of the interface utilized. 2. Select an entry in the History Entry No. field. The statistics are displayed. Configuring RMON Events This section includes the following topics: ■ Defining RMON Events Control ■ Defining RMON Alarms ■ Viewing Event Logs Defining RMON Events Control The RMON Events Control page contains fields for defining RMON events. To view RMON events: Embedded Web System User Guide www.hp.com 15-9