HP BladeSystem bc2800 Embedded Web System User Guide for the HP BladeSystem PC - Page 41

Configuring Device Security RADIUS The RADIUS page contains the following fields: ❏ Default Retries - Defines the number of transmitted requests sent to the RADIUS server before a failure occurs. Possible field values are 1-10. The default value is 3. ❏ Default Timeout for Reply - Defines the amount of time (in seconds) the device waits for an answer from the RADIUS server before retrying the query, or switching to the next server. Possible field values are 1-30. The default value is 3. ❏ Default Dead Time - Defines the default amount of time (in minutes) that a RADIUS server is bypassed for service requests. The range is 0-2000. The default value is 0. ❏ Default Key String - Defines the default key string used for authenticating and encrypting all RADIUS communications between the device and the RADIUS server. This key must match the RADIUS encryption. ❏ Source IP Address - Defines the default IP address of a device accessing the RADIUS server. The RADIUS page also contains the following fields: ❏ IP Address - Lists the RADIUS server IP addresses. ❏ Priority - Displays the RADIUS server priority. The possible values are 1-65535, where 1 is the highest value. The RADIUS server priority is used to configure the server query order. ❏ Authentication Port - Identifies the authentication port. The authentication port is used to verify the RADIUS server authentication. The authenticated port default is 1812. ❏ Number of Retries - Defines the number of transmitted requests sent to the RADIUS server before a failure occurs. The possible field values are 1-10. The default value is 3. ❏ Timeout for Reply - Defines the amount of time (in seconds) the device waits for an answer from the RADIUS server before retrying the query, or switching to the next server. The possible field values are 1-30. The default value is 3. Embedded Web System User Guide www.hp.com 4-15