HP BladeSystem bc2800 Embedded Web System User Guide for the HP BladeSystem PC - Page 22
Defining SNTP Global Settings
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Configuring System Time Defining SNTP Global Settings The SNTP Settings page provides information for defining SNTP parameters globally. To define SNTP global parameters: 1. Click System > Time > SNTP Settings. The SNTP Settings page opens: SNTP Settings The SNTP Settings page contains the following fields: ❏ Enable SNTP Broadcast - If checked, this field enables SNTP broadcast. ❏ Enable SNTP Anycast - If checked, this field enables SNTP Anycast. ❏ SNTP Server - Displays a user-defined SNTP server IP addresses. You can define up to eight SNTP servers. ❏ Poll Interval - Defines the interval (in seconds) at which the SNTP server is polled for Unicast information. The Poll Interval default is 1024 seconds. ❏ Encryption Key ID - Indicates if the encryption key identification is used to authenticate the SNTP server and device. The field value is up to 4294967295. ❏ Preference - Indicates the SNTP server providing SNTP system time information. The possible field values are: ◆ Primary - Indicates the primary server provides SNTP information. ◆ Secondary - Indicates the backup server provides SNTP information. ❏ Status - Indicates the SNTP server operating status. The possible field values are: ◆ Up - Indicates the SNTP server is currently operating normally. ◆ Down - Indicates that a SNTP server is currently not available. For example, the SNTP server is currently not connected or is currently down. 3-6 www.hp.com Embedded Web System User Guide