HP BladeSystem bc2800 Embedded Web System User Guide for the HP BladeSystem PC - Page 92
Defining VLAN Interface Settings
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Configuring Interfaces ❏ Forbidden (Purple) - Denies the interface VLAN membership, even if GARP indicates the port is to be added. 2. Select a VLAN in the VLAN ID field. The VLAN membership settings are displayed. 3. Define the fields. 4. Click updated. . The VLAN membership settings are defined, and the device is Defining VLAN Interface Settings The VLAN Interface Settings page contains fields for managing ports that are part of a VLAN. The Port Default VLAN ID (PVID) is configured on the VLAN Interface Settings page. All untagged packets arriving at the device are tagged with the PVID. To define VLAN interfaces: 1. Click Layer 2 > VLAN > Interface Settings. The VLAN Interface Settings page opens: VLAN Interface Settings The VLAN Interface Settings page contains the following fields: ❏ Ports - Displays VLAN interface settings for ports. ❏ LAGs - Displays the VLAN interface settings or LAGs. ❏ Interface - Displays the port number included in the VLAN. ❏ Interface VLAN Mode - Displays the port mode. The possible values are: ◆ General - Indicates the port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full IEEE802.1q mode). ◆ Access - Indicates the port belongs to a single untagged VLAN. When a port is in Access mode, the packet types which are accepted on the port cannot be designated. Ingress filtering cannot be enabled or disabled on an access port. 6-14 www.hp.com Embedded Web System User Guide