HP BladeSystem bc2800 Embedded Web System User Guide for the HP BladeSystem PC - Page 91

Configuring Interfaces Defining VLAN Membership The VLAN Membership page contains a table that maps VLAN parameters to ports. Ports are assigned VLAN membership by toggling through the Port Control settings. To define VLAN membership: 1. Click Layer 2 > VLAN > Membership. The VLAN Membership page opens: VLAN Membership The VLAN Membership page contains the following fields: ❏ VLAN ID - Displays the user-defined VLAN ID. ❏ VLAN Name - Displays the name of the VLAN. ❏ VLAN Type - Indicates the VLAN type. The possible field values are: ◆ Dynamic - Indicates the VLAN was dynamically created through GARP. ◆ Static - Indicates the VLAN is user-defined. ◆ Default - Indicates the VLAN is the default VLAN. ❏ Ports - Indicates the port membership. ❏ LAG - Indicates the LAG membership. ❏ Untagged (Brown) - Indicates the interface is an untagged VLAN member. Packets forwarded by the interface are untagged. ❏ Tagged (Red) - Indicates the interface is a tagged VLAN member. All packets forwarded by the interface are tagged. The packets contain VLAN information. ❏ Exclude (Gray) - Excludes the interface from the VLAN. However, the interface can be added to the VLAN through GARP. Embedded Web System User Guide www.hp.com 6-13