HP BladeSystem bc2800 Embedded Web System User Guide for the HP BladeSystem PC - Page 54
Port, Enable Multiple Hosts, Action on Violation, Enable Traps
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Configuring Device Security ◆ Disable - Indicates that traps are disabled for Multiple hosts. ❏ Trap Frequency - Defines the time period by which traps are sent to the host. The Trap Frequency field can be defined only if multiple hosts are disabled. The possible field range is 1-1000000. The default is 10 seconds. ❏ Status - Indicates the host status. If there is an asterisk (*), the port is either not linked or is down. The possible field values are: ◆ Unauthorized - Indicates that either the port control is Force Unauthorized and the port link is down, or the port control is Auto but a client has not been authenticated by the port. ◆ Not in auto mode - Indicates that the port control is Forced Authorized, and clients have full port access. ◆ Single-host Lock - Indicates that the port control is Auto and a single client has been authenticated via the port. ◆ No Single Host - Indicates that Multiple Host is enabled. ❏ Number of Violations - Indicates the number of packets that arrived on the interface in single-host mode, from a host whose MAC address is not the supplicant MAC address. To modify settings: 1. Click Network Security > 802.1x > Multiple Host. The Multiple Host page opens. 2. Click . The Multiple Hosts Settings page opens: Multiple Hosts Settings 3. Modify the Port, Enable Multiple Hosts, Action on Violation, Enable Traps, and Trap Frequency fields. 4. Click . The multiple host settings are modified, and the device is updated. 4-28 www.hp.com Embedded Web System User Guide