HP BladeSystem bc2800 Embedded Web System User Guide for the HP BladeSystem PC - Page 23
Defining SNTP Servers
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Configuring System Time ◆ In progress - Indicates the SNTP server is currently sending or receiving SNTP information. ◆ Unknown - Indicates the progress of the SNTP information currently being sent is unknown. For example, the device is currently looking for an interface. ❏ Last Response - Displays the last time a response was received from the SNTP server. ❏ Offset - Indicates the time difference between the device local clock and the acquired time from the SNTP server. ❏ Delay - Indicates the amount of time it takes for a device request to reach the SNTP server. 2. Define the fields. 3. Click . The SNTP global settings are defined, and the device is updated. Defining SNTP Servers To add an SNTP server: 1. Click . The Add SNTP Server page opens: Add SNTP Server In addition to the fields in the SNTP Settings page, the Add SNTP Server page contains the following additional field: ❏ Enable Poll Interval - Indicates if the device polls the SNTP server. The possible field values are: ◆ Checked - Enables polling the SNTP server for SNTP information. ◆ Unchecked - Disables polling the server for SNTP information. This is the default value. 2. Define the SNTP Server, Enable Poll Interval, and Encryption Key ID fields. 3. Click . The SNTP server is added, and the device is updated. Embedded Web System User Guide www.hp.com 3-7