HP BladeSystem bc2800 Embedded Web System User Guide for the HP BladeSystem PC - Page 24

Configuring System Time Defining SNTP Authentication The SNTP Authentication page provides parameters for defining the means by which the SNTP server is authenticated. To define SNTP authentication: 1. Click System > Time > SNTP Authentication. The SNTP Authentication page opens: SNTP Authentication The SNTP Authentication page contains the following fields: ❏ Enable SNTP Authentication - Indicates if authenticating an SNTP session between the device and an SNTP server is enabled on the device. The possible field values are: ◆ Checked - Authenticates SNTP sessions between the device and the SNTP server. ◆ Unchecked - Disables authenticating SNTP sessions between the device and the SNTP server. ❏ Encryption Key ID - Indicates if the encryption key identification is used to authenticate the SNTP server and the device. The field value is up to 4294967295. ❏ Authentication Key - Indicates the key used for authentication. ❏ Trusted Key - Indicates the encryption key used (Unicast/Anycast) or elected (Broadcast) to authenticate the SNTP server. 2. Select the Enable SNTP Authentication field. 3. Click . SNTP Authentication is defined, and the device is updated. 3-8 www.hp.com Embedded Web System User Guide