HP LaserJet MFP M72625-M72630 User Guide - Page 149
Misc. messages, Understanding display messages
View all HP LaserJet MFP M72625-M72630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Misc. messages Message Meaning ● [color] Developer Failure: [error number]. Turn off then on There is a problem in the developer. ● [color] Developer Failure: [error number]. Turn off then on. Please call for service if the problem persists [color] imaging unit is not compatible. Check The imaging unit you have installed is not users guide for your printer. ● [color] imaging unit is not installed. Install it The imaging unit is not installed or the imaging unit is not properly installed. ● Imaging unit is not installed. Install the unit [color] Imaging Unit Failure: [error number]. The imaging unit is not installed. Install [color] imaging unit again End of life. Replace with new [color] imaging The indicated imaging unit has almost unit reached its estimated cartridge life.a Engine System Failure [error number]: Turn There is a problem in the engine system. off then on Fan Failure: [error number]. Open the door, then close it. Call for service if the problem persists There is a problem in the fan. Fan Failure: [error number]. Turn off then on. Call for service if the problem persists There is a problem in the fan. ● Finisher Failure: [error number]. Open There is a problem in the finisher system. the finisher door, then close it. Turn off then on if the problem persists ● Finisher Failure: [error number]. Check finisher Finisher is pulled out. Insert it properly The finisher is not securely connected. Finisher jam door is open. Close it Finisher stapler door is open. Close it ● Front door is open. Close it ● Right door is open. Close it Fuser unit is not compatible. Check user's guide. Fuser unit is not installed. Install it The finisher door is not securely latched. The finisher stapler door is not securely latched. The front door or right door is not securely latched. The fuser unit you have installed is not for your printer. The fuser unit is not properly installed. Suggested solutions Unplug the power cord and plug it back in. If the problem persists, call for service. Install a HP-genuine imaging unit, designed for your printer (see "Available supplies"). Install the imaging unit. If it is already installed, try to reinstall the imaging unit. If the problem persists, call for service. Install the imaging unit. If it is already installed, try to reinstall the imaging unit. If the problem persists, call for service. Replace the imaging unit with a HP-genuine imaging unit (see "Replacing the imaging unit"). Unplug the power cord and plug it back in. If the problem persists, call for service. Open the door, then close it. If the problem persists, call for service. Unplug the power cord and plug it back in. If the problem persists, call for service. Open the door, then close it. If the problem persists, call for service. Reinstall the finisher. If the problem persists, call for service. Close the door until it locks into place. Close the door until it locks into place. Close the door until it locks into place. Install a HP-genuine fuser unit, designed for your printer, call for service. Reinstall the fuser unit. If the problem persists, call for service. ENWW Understanding display messages 139