HP LaserJet MFP M72625-M72630 User Guide - Page 150
Input System Failure: [error number]. Pull
View all HP LaserJet MFP M72625-M72630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Message Meaning Suggested solutions ● Fuser Unit Failure: [error number]. There is a problem in the fuser unit. Turn off then on. Call for service if the problem persists Unplug the power cord and plug it back in. If the problem persists, call for service. ● Fuser Unit Failure: [error number]. Turn off then on ● Fuser Failure: [error number]. Turn off then on HDD System Failure: [error number]. Turn off then on. Call for service if the problem persists There is a problem in the HDD system. Unplug the power cord and plug it back in. If the problem persists, call for service. Hole punch hopper is full. Remove waste of The hole punch hopper is full. hopper Remove the waste in the hopper. Hole punch hopper is not installed. Install hopper The hole punch hopper is not installed. Install the hole punch hopper. If it is already installed, try to reinstall the hole punch hopper. If the problem persists, call for service. Imaging unit requires chargers cleaning. Clean the unit The imaging unit requires charger cleaning. Cleaning the chargers of imaging unit (see "Cleaning the chargers of imaging unit"). Imaging Unit Failure: [error number]. Please There is a problem in the imaging unit. turn off then on Turn the printer off and back on again. If the problem persists, call for service. Inner output tray is full. Remove printed media Inner output tray is full. Remove printed media. Input System Failure: [error number]. Pull [Tray number] out and insert it There is a problem in the tray. Open and close the tray. If the problem persists, call for service. LSU Failure: [error number]. Please turn off There is a problem in the LSU. then on Unplug the power cord and plug it back in. LSU Failure: [error number]. Turn off then on. Call for service if the problem persists There is a problem in the LSU. Unplug the power cord and plug it back in. If the problem persists, call for service. Motor Failure: [error number]. Turn off then There is a problem in the motor system. on. Call for service if the problem persists Unplug the power cord and plug it back in. If the problem persists, call for service. Output tray (face down) is full. Remove printed media Output tray is full. Remove printed media. Prepare new [color] imaging unit The estimated lifea of the imaging unit is close. Prepare a new imaging unit for a replacement (see "Replacing the imaging unit"). Replace with new [color] developer unit The life of the developer unit expires totally. ● You can choose Stop or Continue as shown on the control panel. If you select Stop, the printer stops printing. If you select Continue, the printer keeps printing but the printing quality cannot be guaranteed. ● Replace the developer unit with a new one. If the problem persists, please call for service. Replace with new fuser unit The life of the transfer roller expires totally. Replace the fuser unit with a new one. If the problem persists, please call for service. 140 Chapter 9 Troubleshooting ENWW