HP LaserJet MFP M72625-M72630 User Guide - Page 169

Glossary of terms The following glossary includes terminology commonly used with printing as well as terminology used in this user's manual. Table B-1 Glossary of terms 802.11 802.11 is a set of standards for wireless local area network (WLAN) communication, developed by the IEEE LAN/MAN Standards Committee (IEEE 802). 802.11b/g/n 802.11b/g/n can share the same hardware and use the 2.4 GHz band. 802.11b supports bandwidth up to 11 Mbps, 802.11n supports bandwidth up to 150 Mbps. 802.11b/g/n devices might occasionally suffer interferences from microwave ovens, cordless telephones, and Bluetooth devices. Access point Access point or wireless access point (AP or WAP) is a device that connects wireless communication devices together on a wireless local area networks (WLAN), and acts as a central transmitter and receiver of WLAN radio signals. ADF An Automatic Document Feeder (ADF) is a scanning unit that will automatically feed an original sheet of paper for scanning. BOOTP Bootstrap Protocol. A network protocol used by a network client to obtain its IP address automatically. This is usually done in the bootstrap process of computers or operating systems running on them. The BOOTP servers assigns an IP address from a pool of addresses to each client. BOOTP enables "diskless workstation" computers to obtain an IP address prior to loading any advanced operating system. Build job After scanning is finished, the Scan More Pages window appears to ask if you want to scan additional pages. If you select Yes, then you can scan additional pages to the current job. If you select No, then the scanning process is complete and the remainder of the job is finished. CCD Charged Coupled Device (CCD) is a hardware which enables the scan job. The CCD locking mechanism is also used to hold the CCD module to prevent any damage when the device is moved. Collation Collation is a process of printing a multiple-copy job in sets. When collation is selected, the device prints an entire set before printing additional copies. Confidential This mode is used for printing confidential documents. Password is often required to print the print job. Control Panel The control panel is a flat, typically vertical panel or screen where control or monitoring instruments are displayed. The control panel is found on the front of the device. Coverage Coverage is the printing term used for a toner usage measurement on printing. For example, 5% coverage means that an A4 sided paper has about 5% image or text on it. If the paper or original has complicated images or a large amount of text, the coverage will be higher and at the same time, a toner usage will be as much as the coverage. Default The value or setting that is in effect when a device is unboxed, reset, or initialized. Developer unit The developer unit contains toner carrier that is supplied to the magnetic (development) roller by the two mixing augers. DHCP A Dynamic Host Configuration Protocol (DHCP) is a client-server networking protocol. A DHCP server provides configuration parameters specific to the DHCP client host requesting, generally, information required by the client host to participate on an IP network. The DHCP also provides a mechanism for allocation of IP addresses to client hosts. DIMM Dual Inline Memory Module (DIMM) is a small circuit board that holds memory. The DIMM stores all data within the device, such as printing data and received fax data. DNS The Domain Name Server (DNS) is a system that stores information associated with domain names in a distributed database on networks, such as the internet. Duplex A mechanism that will automatically turn over a sheet of paper so that the device can print (or scan) on both sides of the paper. A device is equipped with a duplex unit can print on both sides of the paper during one print cycle. Glossary of terms 159