HP LaserJet MFP M72625-M72630 User Guide - Page 151
Understanding display messages, UI System Failure:[error number]. Turn off
View all HP LaserJet MFP M72625-M72630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Message Meaning Suggested solutions Replace with new [color] imaging unit The indicated imaging unit has almost reached its estimated cartridge lifea. Replace the imaging unit for the best print quality when this message appears. Using an imaging unit beyond this stage can result in printing quality issues (see "Replacing the imaging unit"). Prepare new transfer belt unit The life of the transfer belt will be expired soon. Replace the transfer belt with a new one. If the problem persists, please call for service. Replace with new Transfer belt unit The life of the transfer belt has expired. Replace with new transfer roller The life of the transfer roller expires totally. Replace the transfer roller with an HPgenuine transfer roller, call for service. Scanner locked or another problem occurred The CCD (Charged Couple Device) lock has been locked. Unlock the CCD lock or turn the printer off and back on again. If the problem persists, call for service. Scan System Failure: [error number]. Turn off then on There is a problem in the scan system. Turn the printer off and back on again. If the problem persists, call for service. Scan Failure: [error number]. Turn off then on. Call for service if the problem persists There is a problem in the sensor. Unplug the power cord and plug it back in. If the problem persists, call for service. Staple cartridge is empty. Replace it Small amount of staple cartridge is left. The Prepare a new staple cartridge for a estimated life of staple cartridge is close. replacement. ● Staple cartridge is low. Prepare it ● Staple cartridge is low. Replace it The staple cartridge has reached the end of its lifespan. This message appears when the staple cartridge is completely empty. Prepare the staple cartridge. Staple cartridge is not install. Install it The staple cartridge is not installed or the staple cartridge is not properly installed. Install the staple cartridge. If it is already installed, try to reinstall the staple cartridge. If the problem persists, call for service. The temperature of this machine is too low. The temperature of this printer is too low. Please wait for a while to warm up Wait for a while to warm up. There has been a problem with fax modem card. Install again. Call for service if the problem persists There is a problem in the fax modem card. Install the fax modem card. If it is already installed, try to reinstall the fax modem card. If the problem persists, call for service. The ACR sensor is dirty. Please clean it with The ACR sensor is dirty. soft cloth or paper Clean ACR sensor with soft cloth or paper. The CTD sensor is dirty. Please clean it with The CTD sensor is dirty. soft cloth or paper Clean CTD sensor with soft cloth or paper. Too much paper in finisher stacker. Remove The finisher stacker is full. printed paper Remove printouts from the finisher stacker, the printer resumes printing. Top door of scanner is open The document feeder door is not securely latched. Close the door until it locks into place. Transfer belt cleaning unit is worn. Replace The life of the transfer belt cleaning unit with new one expires totally. Replace the transfer belt cleaning unit with a HP-genuine transfer belt cleaning unit, call for service. UI System Failure:[error number]. Turn off then on. Call for service if the problem persists There is a problem in the UI system. Unplug the power cord and plug it back in. If the problem persists, call for service. Toner collection unit is almost full. Order new one The toner collection unit is almost full. Prepare a new toner collection unit for replacement. ENWW Understanding display messages 141