HP LaserJet MFP M72625-M72630 User Guide - Page 67
Card stock/ Custom-sized paper, Letterhead/Pre-printed paper
View all HP LaserJet MFP M72625-M72630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Card stock/ Custom-sized paper ● Do not print on media smaller than 98 mm (3.8 inches) wide or 148 mm (5.8 inches) long. ● In the software application, set margins to at least 6.4 mm (0.25 inches) away from the edges of the material. Letterhead/Pre-printed paper Table 3-10 Letterhead / Pre-printed paper Tray Single-sided Standard tray/Optional dual cassette feeder Face up Tray 1 (MP) Face down Double-sided Face down Face up ● Preprinted paper must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the printer's fusing temperature of about 170°C (338 °F) for 0.1 second. ● Preprinted paper ink must be non-flammable and should not adversely affect printer rollers. ● Forms should be sealed in a moisture-proof wrapping to prevent changes during storage. ● Before you load preprinted paper, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper, reducing print quality. Additional information for printing on special media Go to support.hp.com. Instructions are available for performing specific scan tasks, such as the following: ● Special media types and what each tray will support ENWW Printing on special media 57