Lexmark X422 X422 MFP User's Reference - Page 100
Jams inside a tray after clearing the metal stop, Insert the tray. See
View all Lexmark X422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Clearing jams Jams inside a tray after clearing the metal stop The print media jams as it releases from under the metal stop, but it has not completely exited the tray. This can occur in any of the trays. You need to check each tray. 1 Pull the tray completely out. 2 Reposition the print media under the metal stop. Note: If the sheet of print media is damaged, remove it. Do not reposition it. 3 Press down on the print media until the metal plate below it locks into place. 4 Insert the tray. See Page 66 in Loading print media for an illustration of how to insert the tray. 5 Press . Jams inside a tray after clearing the metal stop 100
Jams inside a tray after clearing the metal stop
100
Clearing jams
Jams inside a tray after clearing the metal stop
The print media jams as it releases from under the metal stop, but it has not completely exited the
tray. This can occur in any of the trays. You need to check each tray.
1
Pull the tray completely out.
2
Reposition the print media under the metal stop.
Note:
If the sheet of print media is damaged, remove it. Do not reposition it.
3
Press down on the print media until the metal plate below it locks into place.
4
Insert the tray. See
Page 66
in
Loading print media
for an illustration of how to insert the
tray.
5
Press
.