Lexmark X422 X422 MFP User's Reference - Page 228
Standard USB Port, Unsupported Flash
View all Lexmark X422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
Understanding the MFP control panel messages Message What this message means What you can do 53 Unformatted flash The MFP detects unformatted detected flash memory. Highlight Continue and press to clear the message and continue printing. You must format the flash memory before you can store any resources on it. If the error message reappears, the flash memory may be defective and require replacing. 54 Standard Network Software Error The MFP cannot establish communications with an installed network port. Program new firmware for the network interface by way of the USB port. 55 Unsupported Flash An unsupported flash option is in slot installed in the specified slot. Remove the unsupported flash option from the specified slot. 55 Unsupported Memory in slot An unsupported memory option is installed in the specified slot. Remove the unsupported memory option from the specified slot. See the illustration on page 142 for the location of the slots. 56 Standard USB Port Disabled Data has been sent to the MFP through a USB port, but the USB port is disabled. Make sure the USB Buffer menu item in the USB Menu is not set to Disabled. 88 Toner is low The print cartridge is low on toner. To utilize the remaining toner, remove the cartridge by gripping the handles with both hands. With the cartridge arrows pointing downward, shake the print cartridge back and forth. Reinstall the cartridge. You may notice reduced print quality. Replace the print cartridge. 900-999 Service Messages 900-999 relate to problems that may require service. Turn the MFP off and check all cable connections. Turn the MFP back on. If the service message recurs, call for service and report the message number and description of the problem. See also: Calling for service Administrator menus turned off by system administrator. The support person has restricted See your support person. access to the administration menus. After pressing the green start button the fax will be transmitted on The fax job is queued at the time displayed for delayed send. Press Start to queue the fax job for delayed sending. Continue Answering The device is answering an incoming fax. No action required. MFP messages 228