Lexmark X422 X422 MFP User's Reference - Page 188
Power Saver, Disabled, current Power Saver
View all Lexmark X422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Using the MFP control panel and menus Defaults Menu - Print Settings - Setup Menu(continued) Menu item Power Saver Purpose Values and descriptions To specify the amount of time (in minutes) the MFP waits after a job is completed before it goes into a reduced power state. This menu item is also available in the General Settings menu. Disabled This value does not appear unless Energy Conserve is set to Off. Refer to the Technical Reference for more information on Energy Conserve. 15...240 (45*) Note: This setting applies to the scanner and the printer parts of the MFP. Specifies the amount of time after a print job before the MFP goes into Power Saver mode. Print the menu settings page to determine the current Power Saver setting. When the MFP is in Power Saver mode, it is still ready to receive print jobs. Select 15 to put the MFP in Power Saver mode 15 minutes after it finishes a print job. This uses much less energy, but requires more warm-up time for the MFP. Select 15 if your MFP shares an electrical circuit with room lighting and you notice lights flickering. Select a high value if your MFP is in constant use. Under most circumstances, this keeps the MFP ready to print with minimum warm-up time. Select a value between 15 and 240 minutes if you want a balance between energy consumption and a shorter warm-up period. Menus 188