Netgear GS516TP Software Administration Manual - Page 178
A. Hardware Specifications and Default Values
View all Netgear GS516TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
A. Hardware Specifications and Default Values A The GS516TP switch conforms to the TCP/IP, UDP, HTTP, ICMP, TFTP, DHCP, IEEE 802.1D, IEEE 802.1 p, and IEEE 802.1Q standards. They also conform to the IEEE802.3i (10BASE-T), IEEE802.3ii (100Base-TX), IEEE802.3ab (1000Base-T), IEEE802.3af (DTE Power via MDI), IEEE802.3at (DTE Power via MDI Enhancements), and IEEE802.3az (EEE) standards. Feature Interfaces Flash memory size SDRAM size and type Value The device has the following ports: Ports 1-8. PoE (Power over Ethernet) PSE ports providing up to 15.4 W power Ports 9-14. 10/100/1000 Mbps switching ports Ports 15-16. PD ports receiving power from power devices. 32 MB 128 MB DDR2 Feature Switching capacity Forwarding method Packet forwarding rate MAC addresses Green Ethernet Value Non blocking full wire speed on all packet sizes Store and forward 10M: 14,880 pps 100M: 148,810 pps 1G: 1,488,000 pps 8K Automatic power-down on port when link is down, short cable mode and EEE mode 178