Netgear GS516TP Software Administration Manual - Page 33
SNTP Server Configuration, System > Management > Time > SNTP Server Configuration
View all Netgear GS516TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
GS516TP Gigabit Smart Switches Field Unicast Server Max Entries Unicast Server Current Entries Description Specifies the maximum number of unicast server entries that can be configured on this client. Specifies the number of current valid unicast server entries configured for this client. SNTP Server Configuration Use the SNTP server configuration screen to view and modify information for adding and modifying Simple Network Time Protocol SNTP servers. To configure a new SNTP server: 1. Select System > Management > Time > SNTP Server Configuration. 2. Enter the appropriate SNTP server information in the following fields: • Server Type. Specifies whether the address for the SNTP server is an IP address (IPv4) or hostname (DNS). • Address. Enter the IP address or the host name of the SNTP server. • Port. Enter a port number on the SNTP server to which SNTP requests are sent. The valid range is 1-65535. The default is 123. 3. Click Add. Repeat the previous steps to add more SNTP servers. You can configure up to three SNTP servers. To change the settings for an existing SNTP server: 1. Select the check box next to the configured server. 2. Enter new values in the available fields. 3. Click APPLY. Configuration changes take effect immediately. To remove an SNTP server: 1. Select the check box next to the configured server you want to remove. 2. Click DELETE. The entry is removed, and the device is updated. 33