Netgear GS516TP Software Administration Manual - Page 94

Con IP Settings, To access the IP Configuration screen, Routing > IP > IP Configuration

Get Netgear GS516TP PDF manuals and user guides View all Netgear GS516TP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

GS516TP Gigabit Smart Switches Configure IP Settings Use the IP Configuration screen to configure routing parameters for the switch.  To access the IP Configuration screen: 1. Select Routing > IP > IP Configuration. Default Time to Live displays the default value inserted into the Time-To-Live field of the IP header of datagrams originated by the switch, if a TTL value is not supplied by the transport layer protocol. Maximum Next Hops displays the maximum number of hops supported by the switch. 2. Next to Routing Mode, select Enable or Disable. If you select Disable, the switch is in switch mode. You must enable routing for the switch before you can route through any of the interfaces. Routing is enabled or disabled per VLAN interface. The default value is router mode. 3. Click APPLY to send the updated configuration to the switch. Switching a routing mode requires a reboot. The configuration file is not deleted during the reboot. 94

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
94
GS516TP Gigabit Smart Switches
Configure IP Settings
Use the IP Configuration screen to configure routing parameters for the switch.
To access the IP Configuration screen:
1.
Select
Routing > IP > IP Configuration
.
Default Time to Live displays the default value inserted into the Time-To-Live field of the
IP header of datagrams originated by the switch, if a TTL value is not supplied by the
transport layer protocol.
Maximum Next Hops displays the maximum number of hops supported by the switch.
2.
Next to Routing Mode, select Enable or Disable.
If you select Disable, the switch is in switch mode.
You must enable routing for the switch before you can route through any of the interfaces.
Routing is enabled or disabled per VLAN interface. The default value is router mode.
3.
Click
APPLY
to send the updated configuration to the switch.
Switching a routing mode requires a reboot. The configuration file is not deleted during
the reboot.