Nokia 9000i Nokia 9000i User Guide in English - Page 38
Voice call transfer, Alternating calls, Sending DTMF tones
View all Nokia 9000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
4-8 Conference call Figure 4-4: Conference call Voice call transfer The voice call transfer is a network service that enables you to connect two voice calls together and disconnect yourself from both calls. Note: The transfer operation can be made only if: 1. You have one call on hold. 2. You have one call active. 3. All calls are voice calls (fax or data calls cannot be transferred). 4. None of the calls is a conference call. There are two ways to transfer voice calls from the phone interface: 1. Press 4 followed by . or 2. Press and hold the Menu key for a second. Choose the Transfer option in the menu and press OK, or press Quit to cancel. To transfer from the communicator interface: • When you have one call on hold and another call active, press Call commands. , Choose the option Transfer call and press OK. Alternating calls During an alternating call, you may change the mode of the call from voice to fax. Alternating calls can be made to a fax mailbox, for example: you initiate the call as a voice call, but it changes into a fax call when your fax mailbox starts to send you your faxes. To make alternating calls you need to add a special Tel/Fax field to the contact cards of the services of your alternating calls (see Chapter 3 "Contacts: Contact cards - Customizing contact cards" on page 3-3). You can also change a voice call into a fax call by pressing Change mode. Alternating calls cannot be put on hold or incorporated into a conference call. Sending DTMF tones The Dual Tone Multi Frequency (DTMF) tones allow you to communicate with voice mailboxes, computerized telephony systems, etc. You can use the digits 0 - 9, as well as the characters p, w, * and # (for information on the functions of these characters, see Chapter 3 "Contacts: Contact cards - Storing DTMF tones" on page 3-4). To send a DTMF sequence when you have an active call: 1. Press the digits at the top of the communicator interface keyboard. Each keystroke will generate a DTMF tone which will be transmitted directly. or 2. Press Send DTMF. A list of stored DTMF sequences is shown (for information on how to store DTMF sequences, see Chapter 3 "Contacts: Contact cards - Storing DTMF tones" on page 3-4).