Nokia 9000i Nokia 9000i User Guide in English - Page 93

Chapter 11 - Extras 11-3 All data and calculation commands are entered from the keyboard. The following characters can be used for the corresponding operations: Numbers 0 to 9 . (period) decimal point (space) can be entered, ignored in the calculation + addition - subtraction * multiplication / division ( ) parenthesis = or Enter sum C clears the entry field % percent calculation Calculating percentages The following examples demonstrate the principles for calculating percentages with Calculator: How much is 20% of 1000? 1000 * 20% = 200 What percent of 50 is 10? 10 / 50% = 20 What would be a 22% markup of 500? 500 + 22% = 610 What would be a 17.5% discount of 500? 500 - 17.5% = 412.5 How much is 20%? 20% = 0.2 Clock The Clock shows the time and date in your home location, as well as in other locations throughout the world. The Clock also includes an alarm clock. The "Alarm active" symbol and time of the alarm are shown only if an alarm is active. Alarm clock The Alarm clock is activated with the Alarm clock command in the Clock main view. The alarms will occur according to the home location time (note this when in a different time zone, e.g. when roaming). An alarm can be set to occur within the next 24 hours. Alarms that occur later than this are set in the Calendar application. When the alarm sounds, it can be turned off by pressing any phone interface or communicator interface key. If the alarm is not turned off or it is turned off by pressing other than the OK but- ton on the Communicator interface, the alarm will sound again (the alarm interval is set in the clock settings) for five times or until you press the OK button. Note: If your communicator is locked when the alarm goes off, the first key press turns the alarm off, but the alarm will go off again until you unlock the communicator and press the OK button on the communicator interface. When the alarm sounds, it can be turned off by pressing any phone interface or communicator interface key. To set an alarm: • Press + or - to adjust the time shown in the alarm clock display. Each press changes the time by one minute, but if you hold the button down a while longer, the time will start to change in steps of 15 minutes. , Press OK to accept the set alarm.